B&K Precision 2552-2559 - Programming Manual - Manual (Page 36)

36
DESCRIPTION The DDR? Query reads and clears the contents of
the Device Dependent or device specific error
Register (DDR). In the case of a hardware
failure, the DDR register specifies the origin of
the failure.
QUERY SYNTAX
DDR?
RESPONSE FORMAT DDR <value>
<value> : = 0 to 65535
EXAMPLE
The following instruction reads the contents of
the DDR register:
Command message:
DDR?
Response message:
DDR 0
RELATED COMMANDS ALL_STATUS? ,*CLS
STATUS DDR?
Query