Interface and navigation, 3 display, Fig.: si794 display – Hach-Lange SI794 D User Manual User Manual
Page 23
Display
The figure below identifies all of the possible icons and symbols
that may be seen in the si794 transmitter display.
Interface and navigation
33
4.3 Display
Figure 11
identifies all of the possible icons and symbols that may be
seen in the si792 transmitter display.
Figure 11 Display
1 Passcode
13 Secondary display
2 Temperature
14 Alarm mode
3 4–20 mA/HART output
15 Manual temperature on
4 Limit values (FF and Profibus PA)
16 Calibration mode
5 Alarm
17 Hold mode active
6 Sensocheck—probe error
18 Hourglass (waiting indication)
7 Calibration active
19 Measure mode active
8 Calibration interval
20 Calibration complete
9 Parameter display
21 Calibration—zero or first point
10 Enter prompt
22 Calibration—second point
11 Configuration mode
23 Sensofaces
12 Main display
Fig.: si794 display
1 Passcode
13 Secondary display
2 Temperature
14 Alarm mode
3 4–20 mA/HART output
15 Manual temperature on
4 Limit values
16 Calibration mode
5 Alarm
17 Hold mode active
6 Sensocheck: Sensor error
18 Hourglass (waiting indication)
7 Calibration active
19 Measure mode active
8 Calibration interval
20 Calibration complete
8 Parameter display
21 Calibration: zero or first point
10 Enter prompt
22 Calibration: second point
11 Configuration mode
23 Sensofaces
12 Main display
23