Hach-Lange SI794 D User Manual - Manual (Page 49)

SAt
(Conc)
Code Display Action Choices
CA. Specify calibration mode
(Calibration to saturation or
concentration)
Select using ,
press enter to proceed.
Cal timer interval
The cal timer reminds you to
calibrate in time.
Select position using ,
edit number using ,
press enter to proceed.
0000 h
(0 ...
9999 h)
ON/
OFF AL. Select Sensocheck
(continuous monitoring of
sensor)
Select using ,
press enter to proceed.
Alarm delay
Select position using , edit number
using , press enter to proceed.
0010 sec
(xxxx sec)
LED in Hold mode
Select position using ,
edit number using ,
press enter to proceed.
ON/
OFF
Setting Alarm HOLD
ON on blinks
OFF blinks off
LED status:
49