Hach-Lange SI794 D User Manual - Manual (Page 39)

OFF
(ON)
Code Display Action Choices
o1. 22 mA signal for error message
Select using key
Press enter to proceed.
Output signal during HOLD
LAST: During HOLD the last
measured value is maintained at
the output
FIX: During HOLD a value (to be
entered) is maintained at the
output
Select using key
Press enter to proceed.
LAST
(FIX)
Only with FIX selected:
Enter current which is to flow at
the output during HOLD
Select position using key and
edit number using key.
Press enter to proceed.
21.0 mA
(00.0 ...
21.0 mA)
Output signal during HOLD
Output current
[mA]
Output signal for HOLD
FIX setting = 21.0 mA
HOLD active
21
4
Output signal for HOLD
LAST setting
HOLD active
39