Hach-Lange SI794 D User Manual - Manual (Page 54)

Configuration
Controller (for description see page 78)
Setpoint / Neutral zone
Relay 1 menu group
Relay 2 menu group
Controller setpoint
Enter neutral zone
(P) Controller gain
(I) Reset time T
R
(D) Rate time T
D
Controller type PLC / PFC
PLC: Pulse length
PFC: Pulse frequency
HOLD response
L1.
L2.
Ct.
Relay / Controller rL.
Code Display Menu group Select menu item
Exit:
Press conf, then enter.
Use of relays
54