Number - 19 complete one of the following steps, 1head - automatically loading the atm driver, 1head - manually loading the atm driver – Adaptec 5ANA-940 User Manual
Page 104: Number - 2 bring down the server, Number - 3 boot the server, Automatically loading the atm driver, Manually loading the atm driver
8-14
ANA-5910/5930/5940 User’s Guide
19
Complete one of the following steps:
a
If you do not want to install additional drivers, select No
and press Enter.
b
If you want to install additional drivers, select Yes and press
Enter.
The Select a driver to install menu appears. Refer to your
Novell NetWare documentation for information about
installing drivers from other manufacturers.
20
From the Additional Driver Actions menu, select
Return to the
previous menu
and press Enter.
21
From the Driver options menu, select
Return to the previous
menu
and press Enter.
22
From the Installation Options menu, select
Exit
and press
Enter
.
23
From the Exit INSTALL menu, select
Yes
and press Enter.
Automatically Loading the ATM Driver
When you install the ATM software, the installation program
configures the server to automatically load the ATM driver at
system boot. During installation, the following line is added to the
autoexec.ncf
file:
sys:\system\atms.ncf
If you do not want the ATM driver to automatically load at system
boot, comment out the
sys:\system\atms.ncf
line.
Manually Loading the ATM Driver
To manually load the ATM driver for both Novell NetWare 3.12 and
4.1
1
Comment out the
sys:\system\atms.ncf
line in the
autoexec.ncf
file.
2
Bring down the server.
3
Boot the server.