Adaptec 5ANA-940 - Manual (Page 44)

4-16
ANA-5910/5930/5940 User’s Guide
aatmdiag.exe
The aatmdiag.exe utility is used to diagnose the ATM adapter. The
following is the syntax for using this utility:
aatmdiag [-option “[command][; command]”]
1
Options:
Commands:
Any command listed with the 'help' command when in
'aatmdiag'. Type 'aatmdiag help' for the list of valid commands.
Type help at the ADM:x> prompt for additional help in the
aatmdiag.exe utility.
ADM:0> help
1 Use the -f option and the file name if you created a batch file with the tests
listed in the file.
-c number specifies the controller number
-d <0-1> indicates the log level for loop command
0 = Inhibit pass messages (default)
1 = Print pass messages
-f <filename>1 specifies the input file (i.e., if you created
a batch file with the tests listed in the file)
-l <log Filename> specifies the log file to use
-h display this information