Adaptec 5ANA-940 - Manual (Page 113)

A-3
Product Features and Specifications
ANA-5910/5930/5940 Software
The adapter is shipped with the following software:
■ An ATM driver ( atmo.sys ) provides driver layer access to
higher layer ATM drivers and resides in the host computer
where the adapter is installed. This driver allows Classical IP
operation over ATM using RFC 1577.
■ An ATM Address Resolution Protocol (ATMARP) server
driver (
aarp.sys ) allows Classical IP management and creation
of SVCs from an ATMARP server. This driver software is an
additional package; only one is needed per logical IP subnet
(LIS).
■ Command-line utilities allow driver configuration at the
MS-DOS command line.
■ A command-line diagnostic utility ( aatmdiag.exe ) allows
testing of the adapter and the ATM connection.
■ A Simple Network Management Protocol (SNMP) agent
interfaces with networking management software such as HP
OpenView or SunNet Manager. The SNMP agent files include
aatmsnmpd.dll, ilmi.snm.mib, and ilmi.hpov.mib .