Adaptec 5ANA-940 - Manual (Page 70)

Set the parameters in the dialog box as follows, and select OK:
8 Remove the RFC 1577 CIP ARP Server diskette from the
diskette drive.
9 Select OK to exit the Network Settings dialog box.
10 Select Restart Now to save and initialize changes.
Parameter Setting
IP Address Enter the logical IP subnet where this
ATM ARP server resides; 15
characters maximum; 4 bytes, dotted
decimal format; for example,
192.9.200.0
Subnet Mask Enter the IP subnetwork mask for the
ATM adapter; 15 characters
maximum; 4 bytes, dotted decimal
format; for example, 255.255.255.0
Autostart ARP Server Select the check box to automatically
start the ARP server driver at boot-up.