Adaptec 5ANA-940 - Manual (Page 43)

4-15
Installing ATM Version 4.0x Software for Windows NT
aatmcnfg.exe
The aatmcnfg.exe utility is used for configuring the atmo.sys driver.
The following is the syntax for using this utility:
aatmcnfg [-f ConfigFile] -[x n] -[s | d | p | q | a]
Options:
Use the -q option only if you do not want to use SVCs and if you do
not want to register with a switch, as in back-to-back connections or
when running diagnostics. Use the
-a option if your switch does not
support address registration. Use the -f ConfigFile option to start the
atmo.sys driver with a database file other than the default base.db ,
for example, trial.db .
Note: When you run the utility aatmcnfg without options,
the driver registers with the switch. If the driver fails to
register with the switch, enter
aatmcnfg -s to stop the driver
then try starting it again.
-s shutdown
-d debug
-p print status
-q no signalling
-a no address registration
-x n delete PVC channel n