Adaptec 5ANA-940 - Manual (Page 83)

6-3
Installing ATM Software for DOS/Windows 3.1
7 At the LEC_AUTO_CFG screen, select one of the following:
■ To use the LECS (at the ATM Forum defined Well-Known
LECS Address), press 1.
■ To use an LES (via an address you provide), press 2.
■ To exit the installation utility, press 3.
8 If you selected options 1 or 3 in the previous step, go to step 9.
If you selected option 2, type the LES ATM address at the
ADPT> prompt.
A series of messages appears, advising you that the following
files will be or have been modified:
PROTOCOL.INI
CONFIG.SYS
9 If C:\WINDOWS is the name of your Windows directory, press
Enter at the ADPT>C:\WINDOWS prompt. If Windows is
located in a different place, type the correct drive:\directory
name, and press Enter.
The installation utility advises you that the system.ini file has
been modified.
10 If C:\NWCLIENT is the name of your NetWare Client directory,
press Enter at the ADPT>C:\NWCLIENT prompt. If NetWare
Client is located in a different place, type the correct
drive:\directory name, and press Enter.
The installation utility advises you that the startnet.bat file has
been modified.
11 At the CONFIGURATION COMPLETE! screen, press Enter.