Number - 9 exit the diagnostic program – Adaptec 5ANA-940 User Manual
Page 131
B-13
Windows NT Specific Error Messages and Diagnostics
7
Execute the extended SAR memory test by entering the
following command from the
ADM:0>
prompt:
ADM:0> sar_mem_e
Extended Segmentation and Reassembly Tests
PASSED
8
To execute an optional external test, follow these steps:
a
Remove the ATM cable from the adapter’s ATM connector
(if one is already connected).
b
Place an external ATM loopback cable on the adapter’s ATM
connector. Obtain this cable from your cable vendor.
c
Test the external ATM connection to the adapter by entering
the command from the
ADM:0>
prompt:
ADM:0> atm_external
ATM External Tests
PASSED
d
Remove the loopback cable and reconnect the adapter to
your ATM switch.
9
Exit the diagnostic program:
ADM:0> quit
10
If all the diagnostic tests passed, restart the drivers you need.