Adaptec 5ANA-940 - Manual (Page 74)

5-26
ANA-5910/5930/5940 User’s Guide
3 Start the drivers you need to use by entering the command and
in the following order:
Various command-line options are available for each utility. You can
get help for any of the commands listed in this appendix by typing
-h after the utility, for example:
aatmcnfg -h
aarpcnfg.exe
The aarpcnfg.exe utility is used for configuring the aarp.sys driver.
The following is the syntax for using this utility:
aarpcnfg [-f ConfigFile] -[s | d]
Options:
Use the -f ConfigFile option to start the aarp.sys driver with a
database file other than the default aarp.db .
aatmcnfg starts the atmo.sys driver; use the -q option if
you do not want to use SVCs and if you do not
want to register with an ATM switch (i.e., in
back-to-back connections); use the -a option if
your switch does not support ILMI address
registration
aarpcnfg starts the aarp.sys driver (only needed on the
ATMARP server)
acipcnfg starts the Classical IP part of atmo.sys
alanecnfg starts the alane.sys driver.
-s shutdown
-d debug