Adaptec 5ANA-940 - Manual (Page 66)

5-18
ANA-5910/5930/5940 User’s Guide
The Adaptec LANE Configuration dialog box appears.
Set the following editable parameters as follows, and select
OK
:
Parameter Setting
ELAN Number This read-only field contains the
number automatically assigned to the
LAN during installation. The
ANA-5910/5930/5940 supports up to
four emulated LANs, numbered 0–3.
Server ATM Address Enter the ATM address of the LECS or
of the LES; 20-byte, 40 hex characters;
dotted decimal format. The default
setting is WELL-KNOWN LECS
ADDRESS.
Server Type Select lecs from the drop-down list if
the server is a LAN Emulation
Configuration Server; select les if the
server is a LAN Emulation Server.
Switch Type Select 3.0 from the drop-down list if
the switch software supports UNI 3.0
signaling; select 3.1 if the switch
supports UNI 3.1 signaling.