2head - utp and stp interface (ana5910/5930), 2cntr cell - unused, 2cntr cell - 1 – Adaptec 5ANA-940 User Manual
Page 116: 2cntr cell - transmit a, 2cntr cell - receive a, 2cntr cell - 2, 2cntr cell - transmit b, 2cntr cell - receive b, 2cntr cell - 3, 2cntr cell - 4
A-6
ANA-5910/5930/5940 User’s Guide
UTP and STP Interface (ANA-5910/5930)
Pin contacts are listed here for the STP, UTP-3, UTP-4, and UTP-5
cables
:
1
If your ATM switch is ATM Forum pinout compliant, create a cable to convert to the
pinouts; see Figure on page A-7.
Connector
RJ-45 shielded style interface
Oper. Distance
100 meters
ANA-5910 cable
EIA/TIA UTP-3, 4, 5: 100 ohm
STP type 1, 1A, 2, 2A: 150 ohm
Data rate: 25.6 Mbits/sec
Line code: NRZI
ANA-5930 cable
UTP-5: 100 ohm
Data rate: 155.52 Mbits/sec
Line code: NRZ
ANA-5910
1
/
IBM Defacto Pinout Standard
Pin Contact
ANA-5930/
ATM Forum Pinout Standard
ATM
Workstation/
ANA-5910
Signal
ATM
Network/
Switch Signal
ATM
Workstation/
ANA-5930
Signal
ATM
Network/
Switch Signal
Unused
Unused
1
Transmit A
Receive A
Unused
Unused
2
Transmit B
Receive B
Transmit A
Receive A
3
Unused
Unused
Receive A
Transmit A
4
Unused
Unused
Receive B
Transmit B
5
Unused
Unused
Transmit B
Receive B
6
Unused
Unused
Unused
Unused
7
Receive A
Transmit A
Unused
Unused
8
Receive B
Transmit B