1head - using device drivers and utilities, 2head - stopping atm drivers, 2head - starting atm drivers – Adaptec 5ANA-940 User Manual
Page 73: Using device drivers and utilities 5-25, Using device drivers and utilities, Stopping atm drivers, Starting atm drivers
5-25
Installing ATM Version 2.0x Drivers for Windows NT
Using Device Drivers and Utilities
Stopping ATM Drivers
To stop ATM driver:
Note:
PVCs and other configuration information not stored
in the database files are lost when you stop the drivers.
1
If your path is not set up, change to the directory where you
installed the software.
2
Stop the driver using the appropriate command below and in
the following order:
Starting ATM Drivers
To start the ATM driver:
1
In the Program Manager’s Main group window, select the
MS-DOS Command Prompt
icon.
The Command Prompt window appears.
2
Change to the directory where you installed the software.
alanecnfg -s
stops the
alane.sys driver
acipcnfg -s
stops the Classical IP portion of the
atmo.sys
driver
aarpcnfg -s
stops the
aarp.sys
driver (only needed on
the ATMARP server)
aatmcnfg -s
stops the
atmo.sys
driver