Adaptec 5ANA-940 - Manual (Page 84)

Using Frame Types with Novell NetWare
If your Novell network uses a frame type other than the default
802.2, you must edit the
PROTOCOL.INI file (usually located in
C:\ADPT25LE directory).
To support more than one frame type, you must edit the batch file in
the Novell NetWare Client directory to properly find the multiple
frame types.
ATM drivers are NDIS drivers that use an ODI-to-NDIS enabler to
work with the Novell NetWare client.You cannot set the frame type
in the
net.cfg file in the NetWare Client directory.
❒