Nova-Tech Digi–Sense 12-Channel Benchtop Scanning Thermometer - Manual (Page 11)

10
Rear Panel Connections continued
10-28V DC jack
PC/IN jack
10-28 VDC
7-20 VAC
500 MA
12 CHANNEL TERMOCOUPLE SCANNER
PARALLEL PRINTER
TRIGGER
+ GND
OUT/LINK
RS-
232
MODEL ####-##
Mfg. By Barnant Company Barrington, IL 60010-2392 USA
1
7
2
8
3
9
4
10
5
11
6
12
PC/IN
A
B
A. 10-28V DC jack (Power supply input)
Connect the input connector of the supplied AC adapter here.
Polarity may be either center +, or center –, or AC.
The instrument will accept: 10-28V DC (non-polarized) input @ ~ 300 mA,
or 9-20V AC, 50-400 Hz @~ 500 mA.
The input connector is a 2.5 mm ID, 6.4 mm OD power jack. (Switchcraft
760 or 765 or equivalent.)
B. PC/IN jack (Computer or link connection)
Computer connection Connect (using supplied cable) to a
serial port on your PC computer (RJ-11 connector to DE-9
female using the RS-232 protocol). Software commands
and instructions are available on the supplied CD-ROM. See
package contents page 5.
Link connection Connect PC/IN (using wire with RJ-11 connectors) to
OUT/LINK connection on additional instruments. Uses Linkable Instru-
ment Network connectors and software protocol.
PC/IN
10-28 VDC
7-20 VAC
500 MA
BA 1-12 10/12/01, 11:01 AM 10