Nova-Tech Digi–Sense 12-Channel Benchtop Scanning Thermometer User Manual
Page 67
66
Appendix E
Factory Default settings
A variety of parameters are user set-able using the MENU.
Your menu settings are retained in memory even when the instrument is
turned off or disconnected from a power source.
When the unit is first turned on, the memory contains the factory default
menu settings. To erase all the menu settings and reset the instrument to
factory default menu settings:
1.
Turn off the power using the power switch on the back of the
instrument.
2.
Turn power back on, and before the instrument completes the
display check (before the small 12 turns off).
3.
Push and hold MIN and MAX.
Menu function
Setting
Scale
..............................................................................
°
F
Resolution ......................................................................... 0.1
°
Scan channels ................................................................ all on
Thermocouple types ............................................................. K
Display contrast .................................................................. 25
Trigger mode ..................................................................... S/S
Trigger type ......................................................................... off
Scan rate ........................................................................ 00:04
Print rate ......................................................................... 00:20
Log rate ......................................................................... 00:20
Alarm
Alarm mode .................................................................. off
Alarm print .................................................................... on
HI alarm channel select ........................................... 1 (on)
LO alarm channel select .......................................... 1 (on)
Alarm hysteresis ....................................................... 1.0
°
F
HI alarm setpoint (on/off) .............................................. off
HI alarm setpoint .................................................. 212.0
°
F
LO alarm setpoint (on/off) ............................................. off
LO alarm setpoint ................................................... 32.0
°
F
Alarm beeper ................................................................ off
Date format ................................................................... mm/dd
Date
...................................................................... factory*
Time
...................................................................... factory*
*Date and time are set at factory, USA central time.
Field Calibration
CALPT 1 ................................................................ input**
CALPT 2 ................................................................ input**
**Instrument display shows current input reading.
Calibration report .......................................................... no
BA 62-66
10/12/01, 11:09 AM
66