Nova-Tech Digi–Sense 12-Channel Benchtop Scanning Thermometer - Manual (Page 40)

39
Front panel displays and controls continued
How to set the alarm mode
ALARM
+ -
A L A R M
E X I T
MENU
1
S T O R E
2
L O G
3
R E C A L L
4
P R I N T
5
M A X
6
M I N
7
A V G
8
H O L D
9
S C A N
ALARM
1b 1, 3b
3a
2
1a
0
CLEAR
1. Push MENU until ALARMS is displayed or push MENU at least
once then push ALARM.
ALARM 1a is displayed and the current setting 1b ALARMS OFF,
or ALARMS ON flashes.
2. Push Up/Down arrow keys to switch mode.
3a. Push EXIT to save the setting and return to scanning, or
3b. Push MENU to switch to the next setup topic (set alarm print).
How to set HI alarm(s)
The alarm mode must be ALARMS ON. If the alarm mode is ALARMS
How to set the alarm mode
The alarm mode can be ALARMS OFF, or ALARMS ON.
The default setting is ALARMS OFF.
In ALARMS OFF the instrument does not react to temperature extremes
with an alarm.
In ALARMS ON a HI or LO temperature alarm remains until manually
reset.
To set the alarm mode:
BA 37-43 10/12/01, 11:05 AM 39