Nova-Tech Digi–Sense 12-Channel Benchtop Scanning Thermometer - Manual (Page 20)

19
Front panel displays and controls continued
7 AVG button
8 HOLD button
+ -
A L A R M
E X I T
M E N U
1
S T O R E
2
L O G
3
R E C A L L
4
P R I N T
5
M A X
6
M I N
7
A V G
8
H O L D
9
S C A N
° F
0
C L E A R
.
7 8
7
A V G
7 AVG button
Push to display the average temperature for each channel and the
number of readings that are being averaged. The display continues to
scan channels.
When a numerical entry is required and the NUM icon is on, push to
enter a ‘7’.
• “AVG” appears and remains in the display.
• Readings from when the instrument was last powered up or
cleared are averaged.
• Opened channel readings are not averaged.
• Use Left-Right arrow keys to stop scanning and to choose the
channel whose average is displayed. Push SCAN to return to
scanning channels while remaining in AVG.
• Push AVG again to exit.
8 HOLD button
Push to hold the current record in display.
When a numerical entry is required, and the NUM icon is on, push to
enter an ‘8’.
• “HOLD” appears and remains in the display.
• Channel scanning, logging, printing continue normally but the
display remains.
• Push HOLD or EXIT to exit.
5
° F
AVG
8
H O L D
BA 13-25 10/12/01, 11:03 AM 19