Nova-Tech Digi–Sense 12-Channel Benchtop Scanning Thermometer - Manual (Page 54)

53
Service calibration performed on 04/09/98 at 13:28:47
Field calibration status as of 04/09/98 14:11:50, scale = C
Ch CalPt.1 Change CalPt.2 Change Date Time
------- ------ ------- ------ -------- --------
1 None 0.0 None 0.0 04/09/98 14:01:45
2 -16.7 0.0 482.3 0.0 04/09/98 13:58:51
3 -16.1 0.0 482.4 0.4 04/09/98 13:58:51
4 -15.5 0.1 482.5 0.2 04/09/98 13:58:51
5 -15.0 0.1 482.5 0.2 04/09/98 13:58:51
6 -14.4 0.1 482.6 0.4 04/09/98 13:58:51
7 -13.9 0.1 482.6 0.3 04/09/98 13:58:51
8 -13.3 -0.1 482.7 0.6 04/09/98 13:58:51
9 -12.8 0.0 482.7 0.5 04/09/98 13:58:51
10 -12.2 0.0 482.8 0.5 04/09/98 13:58:51
11 -11.7 0.0 482.8 0.6 04/09/98 13:58:51
12 -11.1 0.0 482.9 0.7 04/09/98 13:58:51
Front panel displays and controls continued
How to print a calibration report
Note: This is only valid if an optional parallel printer is attached to the
DB-25 (M) input connection. Alternately, this report may be obtained
through “ScanLink”.
To print a calibration report:
1. If MENU 1a is pushed the display REPORT NO with NO 1b
flashing appears. Push MENU 1a or EXIT 1c to skip printing a
calibration report, or
2. Push either of the Up or Down arrow keys 2 to choose to print a
calibration report.
3. Push MENU 3a or EXIT 3b to save the setup (all setup changes
since MENU was first pushed), print the calibration report (if YES
was chosen) and return to scanning.
Example field calibration report
°
C:
Note: Service field calibration can only be performed by an authorized
service facility. Contact your authorized dealer for information.
+ -
A L A R M
E X I T
MENU
1
S T O R E
2
L O G
3
R E C A L L
4
P R I N T
5
M A X
6
M I N
7
A V G
8
H O L D
0
C L E A R
9
S C A N
PRINT CAL
1a, 3a
1c, 3b
1b
2
BA 50-59 10/12/01, 11:07 AM 53