Nova-Tech Digi–Sense 12-Channel Benchtop Scanning Thermometer User Manual
Page 35
34
Front panel displays and controls continued
How to set trigger mode
How to set trigger mode
If a trigger type is set to PRINT or STORE, the trigger mode can be set.
(See How to set trigger type on preceding page.)
The modes are PULSE (momentary action, as in pushing and releasing a
button), and S/S (start/stop, toggle action as in switching on or off).
The default setting is PULSE.
+ -
A L A R M
E X I T
MENU
1
S T O R E
2
L O G
3
R E C A L L
4
P R I N T
5
M A X
6
M I N
7
A V G
8
H O L D
9
S C A N
1b
1, 3b
3a
1a
2
0
CLEAR
To set or adjust the trigger mode:
1. Push MENU until TRIG’R 1a is displayed and the current setting
1b (PULSE or S/S) flashes.
2. Push the Up or Down arrow keys to switch between PULSE and
S/S.
3a. Push EXIT to save the setting and return to scanning, or
3b. Push MENU to switch to the next setup topic (adjust the scan rate).
BA 32-36
10/12/01, 11:04 AM
34