Nova-Tech Digi–Sense 12-Channel Benchtop Scanning Thermometer User Manual
Page 31
30
30
Front panel displays and controls continued
How to Enable/Disable channels
1
2
3
4
5
6
7
8
9
10
11
12
How to Enable/Disable channels
A thermocouple channel can be turned off if that channel is not used or
not desired. A channel that is turned off will be skipped in a scan and
listed as OFF in a printout.
+ -
A L A R M
E X I T
M E N U
1
S T O R E
2
L O G
3
R E C A L L
4
P R I N T
5
M A X
6
M I N
7
A V G
8
H O L D
9
S C A N
3
2
1, 4b
4a
1a
1
2
3
4
5
6
7
8
9
10
11
12
0
C L E A R
The default setting is all channels ON.
To set or change scan channels:
1. Push MENU until 1’s and 0’s are displayed and the current
channel 1a flashes. (1 is scan channel on, 0 is scan channel off.)
2. Push the Up or Down arrow keys as the channel flashes to
toggle between 1 and 0.
3. Push Left or Right arrow keys to switch channels.
Repeat steps 2 and 3 for all channels you want to change.
4a. Push EXIT to save the setup and return to scanning, or
4b. Push MENU to switch to the next setup topic (setup thermo-
couple types).
BA 26-31
10/12/01, 11:04 AM
30