Nova-Tech Digi–Sense 12-Channel Benchtop Scanning Thermometer - Manual (Page 3)

1
Introduction
Safety Precautions
Introduction
This Scanning Thermocouple Thermometer continuously monitors
temperatures at up to 12 locations. It is designed for laboratory or
industrial applications for unattended temperature monitoring. An alarm is
set off when any thermometer exceeds its preset minimum or maximum
temperature. Temperature data is stored within the unit and can be
output to a printer or PC.
Safety Precautions
DANGER: If thermocouples are at a high voltage, this voltage may be
present at other points inside the instrument and outside at
all the connectors.
WARNING: Disconnect or turn off power source before making
connections.
WARNING: Turn power off and completely disconnect instrument.
Disconnect power source, thermocouples, computer, links,
and printer.
WARNING: Other than a lithium battery, there are no user serviceable
parts inside. Replacement of the lithium battery must be
performed per the Maintenance section of this Operating
Manual. Refer servicing to your dealer.
CAUTION: Be sure available power matches instrument power require-
ments.
CAUTION: Protection provided by the unit may be impaired if the unit is
installed and/or operated in a manner inconsistent with
these instructions.
WINDOWS, WINDOWS NT - Reg TM Microsoft Corp.
CENTRONICS - Reg TM Genicom Corporation
Trademarks bearing the ® symbol in this publication are
registered in the U.S.A. and in other countries.
BA 1-12 10/12/01, 11:01 AM 1