Nova-Tech Digi–Sense 12-Channel Benchtop Scanning Thermometer - Manual (Page 41)

40
Front panel displays and controls continued
How to set the alarm print
How to set the alarm print
Alarm print can be PRINT ON or PRINT OFF.
The default setting is PRINT ON.
When set to PRINT ON a record is printed on your attached printer when
an alarm event occurs.
To set the alarm print:
1. Push MENU until ALARM 1a and PRINT 1b are displayed and the
current setting 1b (ON or OFF) flashes.
2. Push the Up/Down arrow keys to toggle between ON and OFF.
3a. Push EXIT to save the setting and return to scanning, or
3b. Push MENU to switch to the next topic (set HI alarm(s), if the alarm
mode is ALARMS OFF the next setup topic is Enable/Disable the
alarm beeper).
ALARM
+ -
A L A R M
E X I T
MENU
1
S T O R E
2
L O G
3
R E C A L L
4
P R I N T
5
M A X
6
M I N
7
A V G
8
H O L D
9
S C A N
1b 1, 3b
3a
2
1a
0
CLEAR
ALARM
BA 37-43 10/12/01, 11:05 AM 40