Nova-Tech Digi–Sense 12-Channel Benchtop Scanning Thermometer - Manual (Page 21)

20
Front panel displays and controls continued
9 SCAN button
0 CLEAR button
0
CLEAR
+ -
A L A R M
E X I T
M E N U
1
S T O R E
2
L O G
3
R E C A L L
4
P R I N T
5
M A X
6
M I N
7
A V G
8
H O L D
9
S C A N
° F
0
C L E A R
.
9 0
9 SCAN button
Push to start a channel scan.
When a numerical entry is required and the NUM icon is on, push to
enter a ‘9’.
• Each channel is displayed for three seconds.
• Use to return to scanning after scanning is stopped by using the
Left-Right arrow keys.
• Causes an immediate scan.
0 CLEAR button
Push CLEAR, then push AVG, ALARM, MAX, MIN, STORE or LOG to
clear that value.
When a numerical entry is required and the NUM icon is on, push to
enter a ‘0’.
• CLEAR - AVG erases the 12-Channel record containing the
average temperature from memory.
• CLEAR - ALARM turns the alarm buzzer off, all alarm conditions,
error messages, and temperature out of range alarms. Normally
push ALARM when an alarm occurs, that stops the alarm buzzer
and checks the alarm condition.
• CLEAR - MAX erases the 12-Channel record containing the
maximum temperature from memory.
• CLEAR - MIN erases the 12-Channel record containing the mini-
mum temperature from memory.
• CLEAR - STORE erases the 12-Channel records that have been
logged or stored in memory (= CLEAR - LOG).
• CLEAR - LOG erases the 12-Channel records that have been
logged or stored in memory (= CLEAR - STORE).
9
S C A N
BA 13-25 10/12/01, 11:03 AM 20