Nova-Tech Digi–Sense 12-Channel Benchtop Scanning Thermometer - Manual (Page 32)

31 31
Front panel displays and controls continued
How to setup thermocouple types
1 2 3 4 5 6 7 8 9 10 11 12
How to setup thermocouple types
Thermocouples of types K, J, B, N, S, R, E or T can be used with this
instrument. Any combination of thermocouple types can be used.
See Appendix B for thermocouple specifications.
The default setting for all channels is type K.
To set or change thermocouple type:
1. Push MENU until K’s (or other types) are displayed and the
current channel 1a flashes (disabled channels are blank).
2. Push Left or Right arrow keys to switch channels.
3. Push the Up or Down arrow keys as the channel flashes to scroll
through thermocouple types.
Repeat steps 2 and 3 for all thermocouple type changes.
4a. Push EXIT to save the setup and return to scanning, or
4b. Push MENU to switch to the next setup topic (adjust the display
contrast).
+ -
A L A R M
E X I T
MENU
1
S T O R E
2
L O G
3
R E C A L L
4
P R I N T
5
M A X
6
M I N
7
A V G
8
H O L D
9
S C A N
1 2 3 4 5 6 7 8 9 10 11 12
2 3 1, 4b
4a
1a
0
CLEAR
BA 26-31 10/12/01, 11:04 AM 31