Displaying port members of multicast services – Alcatel Carrier Internetworking Solutions OmniStack 6300-24 User Manual

Page 204

Advertising
background image

Configuring the Switch

3-164

3

Web – Click IGMP Snooping, Static Multicast Router Port Configuration. Specify the
interfaces attached to a multicast router, indicate the VLAN which will forward all the
corresponding multicast traffic, and then click Add. After you have finished adding
interfaces to the list, click Apply.

Figure 3-103. Static Multicast Router Port Configuration

CLI – This example configures port 11 as a multicast router port within VLAN 1.

Displaying Port Members of Multicast Services

You can display the port members associated with a specified VLAN and multicast
service.

Command Attribute
VLAN ID – Selects the VLAN for which to display port members.
Multicast IP Address – The IP address for a specific multicast service.
Multicast Group Port List – Shows the interfaces that have already been

assigned to the selected VLAN to propagate a specific multicast service.

Console(config)#ip igmp snooping vlan 1 mrouter ethernet 1/11

4-225

Console(config)#exit
Console#show ip igmp snooping mrouter vlan 1

4-226

VLAN M'cast Router Port Type
---- ------------------ -------
1 Eth 1/11 Static

Advertising