Smtp alert commands, Table 4-19, Remote logging parameters – Alcatel Carrier Internetworking Solutions OmniStack 6300-24 User Manual

Page 258: Table 4-20, Table 4-18, System logging parameters

Advertising
background image

Command Line Interface

4-46

4

The following example displays settings for the trap function.

Related Commands

show logging sendmail (4-49)

SMTP Alert Commands

Configures SMTP event handling, and forwarding of alert messages to the specified
SMTP servers and email recipients.

Table 4-18. System Logging Parameters

Field

Description

Syslog logging

Shows if system logging has been enabled via the logging on command.

History logging in FLASH The message level(s) reported based on the logging history command.
History logging in RAM

The message level(s) reported based on the logging history command.

Messages

Any system and event messages stored in memory.

Console#show logging trap
Syslog logging: Enabled
REMOTELOG status: Enabled
REMOTELOG facility type: local use 7
REMOTELOG level type: Informational messages only
REMOTELOG server IP address: 192.168.1.6
REMOTELOG server IP address: 192.168.1.7
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
Console#

Table 4-19. Remote Logging Parameters

Field

Description

Syslog logging

Shows if system logging has been enabled via the logging on command.

REMOTELOG status

Shows if remote logging has been enabled via the logging trap command.

REMOTELOG

facility type

The facility type for remote logging of syslog messages as specified in the logging

facility command.

REMOTELOG level type The severity threshold for syslog messages sent to a remote server as specified in

the logging trap command.

REMOTELOG

server IP address

The address of syslog servers as specified in the logging host command.

Table 4-20. SMTP Alert Commands

Command

Function

Mode

Page

logging sendmail host

SMTP servers to receive alert messages

GC

4-47

logging sendmail level

Severity threshold used to trigger alert messages

GC

4-47

logging sendmail

source-email

Email address used for “From” field of alert messages

GC

4-48

logging sendmail

destination-email

Email recipients of alert messages

GC

4-48

Advertising