Alcatel Carrier Internetworking Solutions OmniStack 6300-24 - Manual (Page 68)

Configuring the Switch
3-28
3
Web – Click System, Log, SMTP. Enable SMTP, specify a source email address,
and select the minimum severity level. To add an IP address to the SMTP Server
List, type the new IP address in the SMTP Server text box and then click Add. To
delete an IP address, click the entry in the SMTP Server List and then click Remove.
Specify up to five email addresses to receive the alert messages, and then click
Apply.
Figure 3-6. Enabling and Configuring SMTP Alerts
CLI – Enter the IP address of at least one SMTP server, set the syslog severity level
to trigger an email message, and specify the switch (source) and up to five recipient
(destination) email addresses. Enable SMTP with the logging sendmail command