Alcatel Carrier Internetworking Solutions OmniStack 6300-24 - Manual (Page 235)

System Management Commands
4-23
4
Default Setting
None
Command Mode
Any
Example
This example shows how to return to the Privileged Exec mode from the Global
Configuration mode, and then quit the CLI session:
quit
This command exits the configuration program.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
The quit and exit commands can both exit the configuration program.
Example
This example shows how to quit a CLI session:
System Management Commands
These commands are used to control system logs, passwords, user names, browser
configuration options, and display or configure a variety of other system information.
Console(config)#exit
Console#exit
Press ENTER to start session
User Access Verification
Username:
Console#quit
Press ENTER to start session
User Access Verification
Username:
Table 4-7. System Management Commands
Command Group Function Page
Device Designation Configures information that uniquely identifies this switch 4-24
User Access Configures the basic user names and passwords for management access 4-25