Alcatel Carrier Internetworking Solutions OmniStack 6300-24 - Manual (Page 414)

Command Line Interface
4-202
4
show queue cos-map
This command shows the class of service priority map.
Syntax
show queue cos-map [interface]
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-6)
Default Setting
None
Command Mode
Privileged Exec
Example
Priority Commands (Layer 3 and 4)
Console#show queue cos-map ethernet 1/1
Information of Eth 1/1
CoS Value : 0 1 2 3 4 5 6 7
Priority Queue: 2 0 1 3 4 5 6 7
Console#
Table 4-64. Priority Commands (Layer 3 and 4)
Command Function Mode Page
map ip port Enables TCP class of service mapping GC 4-203
map ip port Maps TCP socket to a class of service IC 4-203
map ip precedence Enables IP precedence class of service mapping GC 4-204
map ip precedence Maps IP precedence value to a class of service IC 4-204
map ip dscp Enables IP DSCP class of service mapping GC 4-205
map ip dscp Maps IP DSCP value to a class of service IC 4-206
map access-list ip Sets the CoS value and corresponding output queue for
packets matching an ACL rule
IC 4-207
show map ip port Shows the IP port map PE 4-208
show map ip precedence Shows the IP precedence map PE 4-200
show map ip dscp Shows the IP DSCP map PE 4-209