Alcatel Carrier Internetworking Solutions OmniStack 6300-24 - Manual (Page 77)

Simple Network Management Protocol
3-37
3
• Level – The security level used for the user:
- noAuthNoPriv – There is no authentication or encryption used in SNMP
communications.
- AuthNoPriv – SNMP communications use authentication, but the data is not
encrypted (only available for the SNMPv3 security model).
- AuthPriv – SNMP communications use both authentication and encryption (only
available for the SNMPv3 security model).
• Authentication – The method used for user authentication; MD5 only.
• Privacy – The encryption algorithm use for data privacy; only 56-bit encryption is
currently available
• Actions – Enables the user to be assigned to another SNMPv3 group.
Web – Click SNMP, SNMPv3, Users. Click New to configure a user name. In the
New User page, define a name and assign it to a group, then click Add to save the
configuration and return to the User Name list. To delete a user, check the box next
to the user name, then click Delete. To change the assigned group of a user, click
Change Group in the Actions column of the users table and select the new group.
Figure 3-9. Configuring SNMPv3 Users