Alcatel Carrier Internetworking Solutions OmniStack 6300-24 - Manual (Page 341)

Interface Commands
4-129
4
Example
Interface Commands
These commands are used to display or set communication parameters for an
Ethernet port, aggregated link, or VLAN.
Console#clear dns cache
Console#show dns cache
NO FLAG TYPE IP TTL DOMAIN
Console#
Table 4-42. Interface Commands
Command Function Mode Page
interface Configures an interface type and enters interface configuration
mode
GC 4-130
description Adds a description to an interface configuration IC 4-131
speed-duplex Configures the speed and duplex operation of a given interface
when autonegotiation is disabled
IC 4-131
negotiation Enables autonegotiation of a given interface IC 4-132
capabilities Advertises the capabilities of a given interface for use in
autonegotiation
IC 4-133
flowcontrol Enables flow control on a given interface IC 4-134
combo-forced-mode Force port type selected for combination ports IC 4-135
shutdown Disables an interface IC 4-135
switchport broadcast
packet-rate
Configures the broadcast storm control threshold IC 4-136
clear counters Clears statistics on an interface PE 4-137
show interfaces status Displays status for the specified interface NE, PE 4-138
show interfaces
counters
Displays statistics for the specified interfaces NE, PE 4-139
show interfaces
switchport
Displays the administrative and operational status of an
interface
NE, PE 4-140