Snmp-server user, Show snmp user – Alcatel Carrier Internetworking Solutions OmniStack 6300-24 User Manual

Page 331

Advertising
background image

SNMP Commands

4-119

4

snmp-server user

Use this command to add a user to an SNMP group, restricting the user to a specific
SNMP Read and a Write View. Use the no form to remove a user from an SNMP
group.

Syntax

snmp-server user username groupname {v1 | v2c | v3 [encrypted]

[auth {md5 | sha} auth-password [priv des56 priv-password]]

no snmp-server user username

username - Name of user connecting to the SNMP agent. (Range: 1-32

characters)

• groupname - Name of an SNMP group to which the user is assigned.

(Range: 1-32 characters)

v1 | v2c | v3 - Use SNMP version 1, 2c or 3.
encrypted - Accepts the password as encrypted input.
auth - Uses SNMPv3 with authentication.
md5 | sha - Uses MD5 or SHA authentication.
auth-password - Authentication password. Enter as plain text if the

encrypted option is not used. Otherwise, enter an encrypted password.
(A minimum of eight characters is required.)

priv des56 - Uses SNMPv3 with 56-bit DES data encryption.
priv-password - Privacy password. Enter as plain text if the encrypted

option is not used. Otherwise, enter an encrypted password.

Default Setting

None

Command Mode

Global Configuration

Command Usage

• The SNMP engine ID is used to compute the authentication/privacy digests

from the password. You should therefore configure the engine ID with the
snmp-server engine-id command before using this configuration command.

• SNMP passwords are localized using the authoritative SNMP engine ID.

Example

show snmp user

Use this command to show information on SNMP users.

Command Mode

Privileged Exec

Console(config)#snmp-server user steve group r&d v3 auth md5 greenpeace

priv des56 einstien

Console(config)#

Advertising