Alcatel Carrier Internetworking Solutions OmniStack 6300-24 - Manual (Page 430)

Command Line Interface
4-218
4
Command Mode
Privileged Exec
Example
Multicast Filtering Commands
This switch uses IGMP (Internet Group Management Protocol) to query for any
attached hosts that want to receive a specific multicast service. It identifies the ports
containing hosts requesting a service and sends data out to those ports only. It then
propagates the service request up to any neighboring multicast switch/router to
ensure that it will continue to receive the multicast service.
IGMP Snooping Commands
ip igmp snooping
This command enables IGMP snooping on this switch. Use the no form to disable it.
Syntax
[no] ip igmp snooping
Console#show policy-map ethernet 1/1
Policy Map rd_policy
class rd_class
set ip dscp 3
Console#
Table 4-68. Multicast Filtering Commands
Command Groups Function Page
IGMP Snooping Configures multicast groups via IGMP snooping or static assignment,
sets the IGMP version, displays current snooping and query settings,
and displays the multicast service and group members
4-218
IGMP Query Configures IGMP query parameters for multicast filtering at Layer 2 4-222
Static Multicast Routing Configures static multicast router ports 4-225
Table 4-69. IGMP Snooping Commands
Command Function Mode Page
ip igmp snooping Enables IGMP snooping GC 4-218
ip igmp snooping vlan static Adds an interface as a member of a multicast group GC
4-21
9
ip igmp snooping version Configures the IGMP version for snooping GC 4-220
show ip igmp snooping Shows the IGMP snooping and query configuration PE 4-220
show mac-address-table
multicast
Shows the IGMP snooping MAC multicast list PE 4-221