Acl information, Show access-list, Table 4-37 – Alcatel Carrier Internetworking Solutions OmniStack 6300-24 User Manual
Page 319
Access Control List Commands
4-107
4
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
You must configure an ACL mask before you can change frame priorities
based on an ACL rule.
Example
Related Commands
ACL Information
show access-list
This command shows all ACLs and associated rules, as well as all the user-defined
masks.
Command Mode
Privileged Exec
Command Usage
Once the ACL is bound to an interface (i.e., the ACL is active), the order in
which the rules are displayed is determined by the associated mask.
Console(config)#interface ethernet 1/12
Console(config-if)#match access-list mac a set priority 0
Console(config-if)#
Table 4-37. ACL Information
Command
Function
Mode
Page
show access-list
Show all ACLs and associated rules
PE
show access-group
Shows the ACLs assigned to each port
PE