Alcatel Carrier Internetworking Solutions OmniStack 6300-24 - Manual (Page 326)

Command Line Interface
4-114
4
snmp-server
Use this command to enable the SNMP v3 engine. Use the no form to disable the
engine.
Default Setting
Enabled
Command Mode
Global Configuration
Example
snmp-server engine-id
Use this command to configure an identification string for the SNMP v3 engine. Use
the no form to restore the default.
Syntax
snmp-server engine-id local engineid-string
no snmp-server engine-id local
engineid-string - String identifying the engine ID.
(Range: 1-26 hexadecimal characters)
Default Setting
A unique engine ID is automatically generated by the switch based on its MAC
address.
Command Mode
Global Configuration
Command Usage
• An SNMP engine is an independent SNMP agent that resides on this switch.
This engine protects against message replay, delay, and redirection. The
engine ID is also used in combination with user passwords to generate the
security keys for authenticating and encrypting SNMPv3 packets.
• Trailing zeroes need not be entered to uniquely specify a engine ID. In other
words, the value “1234” is equivalent to “1234” followed by 22 zeroes.
• If the local engineID is deleted or changed, all SNMP users will be cleared.
You will need to reconfigure all existing users (page 4-119).
Example
Console(config)#snmp-server
Console(config)#
Console(config)#snmp-server engineID local 12345
Console(config)#