Ransburg Vector Solo AA90 79698 - Manual (Page 14)

Vector Solo AA90 Applicators - Introduction
Ransburg
10 AH-08-04.2
Fluid Flow
Capacity: Variable to 1,500 cc/minute
(spray tip dependent)
Wetted Parts: Stainless, polyethylene,
nylon, acetal polymer,
tungsten carbide
Operating Pressure
Fluid: 207 bar (0-3000 psi) Max.
Air: 6.9 bar (0-100 psi) Max.
Ambient Temp.: 40°C to 0°C
(104°F to 32°F)
Consumption: 205 SLPM (7.2 SCFM) @
2.8 bar (40 psig) @ Handle
Inlet
Sound Level: 92dB (A) @ 2.8 bar
(40 psig) Inlet,
1m from applicator
Vibration Level: 0.065 m/S 2 @ 2.8 bar (40
psig) @ Handle Inlet
Applicator Length: 269mm (10.6-inches)
Weight: 973 grams (31.0 oz.)
Hose 79727-XX
Lengths (Std): 10m, 15m, 20m, and 30m
Atomizer Nozzle
Assembly (Std): 79691-XXXX
(See "Nozzle Selection Guide")
Operating Voltage: 85kV DC (-) maximum
Current Output: 130 microamperes maximum
Paint Resistance:* .1 MW to ∞
*(Use Model No. 76652, Test Equipment)
Part Sprayability: Determine sprayability of
part to be coated using
76652, Test Equipment
(See current "Paint, HV & SCI Test Equipment"
service manual.)
79698 VECTOR SOLO AA90
SPECIFICATIONS
Environmental/Physical
Electrical
Mechanical