Ransburg Vector Solo AA90 79698 - Manual (Page 37)

Vector Solo AA90 Applicators - Maintenance
Ransburg
33 AH-08-04.2
† The power modules are not serviceable.
NOTE
2. Remove three (3) bolts using a 3mm Allen
wrench.
Figure 48: Power Module Removal
3. Pull the module straight off the handle.
Figure 49: Power Module Removal
2. Tighten rear nut using Special Wrench 79854-
00. Tighten until drag is felt on the shaft when it
is pushed back and forth.
Figure 46: Adjustable Needle Shaft
3. Reinstall cascade.
4. Reinstall barrel to handle.
Power Module Removal
1. Remove the fluid line.
Figure 47: Fluid Line Removal
C C W
C C W