Ransburg, Vector solo aa90 applicators - maintenance – Ransburg Vector Solo AA90 79698 User Manual
Page 34
Advertising
Vector Solo AA90 Applicators - Maintenance
Ransburg
30
AH-08-04.2
C W
C W
Figure 34: Second Jam Nut Replacement
3. Tighten second jam nut with raised center facing
out, while holding the needle shaft.
Figure 37: Rear Cover Replacement
4. Install the fluid adjustment assembly along with
the air and fluid return springs.
Figure 36: Fluid Line/Trigger Installation
Figure 35: Spring and Fluid Adjust
Valve Replacement
5. Install trigger and fluid line.
1 - Fluid Return Spring
2 - Air Valve Knob
3 - Air Valve Return Spring
6. Reconnect the rear cover and install with two
(2) 4mm screws.
Advertising