Ransburg Vector Solo AA90 79698 - Manual (Page 38)

Vector Solo AA90 Applicators - Maintenance
Ransburg
34 AH-08-04.2
4. Remove the rear seal.
Figure 51: Rear Seal Removal
5. Using a dowel rod, push out the air valve
cartridge.
Figure 52: Air Valve Cartridge Removal
6. Remove air valve cartridge seal (black) (see
Figure 48).
7. Remove front air valve seal (white).
Figure 53: Air Valve Cartridge Seal and Front
Seal Removal
† If you remove the air valve seal, it is
highly recommended that it is replaced.
NOTE
Figure 50: Air Valve Removal
Handle Disassembly
1. Remove barrel.
2. Remove power module.
3. Push air valve out.
1 - Push Out From Here
1 - 6mm (1/4") Dowel
1 - Rear Seal
2 - Air Valve Cartridge Seal
3 - Front Air Valve Seal