Ransburg RMA Indirect A11600 - Manual (Page 51)

Procedure
Mid
Shift
End of
Shift Weekly 2 Weeks
RMA-303 PREVENTIVE MAINTENANCE SCHEDULE
Mid Shift Cleaning X
• Wipe electrodes
• Wipe shroud
• Visually inspect cup
End of Shift Cleaning X
• Wipe electrodes
• Wipe shroud
• Wipe bell cup down
• Change cloth cover
Shaping Air Shroud X X X
• Clean inner shape air ring
• Clean outer shape air ring
• Remove and clean
Bell cup removal/inspection/ X X
cleaning/tightening
Fluid tip inspection/cleaning X X
Inspect Valve and Seat X
Assembly in valve module
for leaking
Replace Valves and Seats X
in valve module
High Voltage Cable X X
Inspections
High Voltage Testing X
Regreasing of High Voltage X
Cables
Check resistance of High X
Voltage Electrodes
Regreasing electrode X
cavitiesof High Voltage Ring
and High Voltage Input
Inspect all screws X
• Replace if broken
• Inspect for wear
• Tighten per specifications
Frequency (Maximum)
Monthly 3 Months 6 Months Yearly
(Continued On Next Page)
RMA-303 Indirect Charge - Maintenance
Ransburg
47 LN-9252-06.4