Ransburg RMA Indirect A11600 - Manual (Page 84)

Figure 64: A11699 Turbine Manifold Assembly
1 A11698-00 Atomizer Body Assembly 1
2 79001-22 O-Ring, Solvent Proof 1
3 ---- ---- --
4 ---- ---- --
5 79001-34 O-Ring, Solvent Proof 2
6 77762-04 Collet, 8mm 2
7 77762-02 Collet, 10mm 2
8 79001-31 O-Ring, Solvent Proof 2
9 77762-01 Collet, 6mm 2
10 79001-32 O-Ring, Solvent Proof 2
11 78266-00 Fitting, 10mm AN 1
12 78272-00 Ferrule, Back, 10mm 1
13 78274-00 Nut, Modified, 10mm OD 1
14 78271-00 Ferrule, Front, 10mm 1
15 79001-30 O-Ring, Solvent Proof 2
16 77516-04 Collet, 4mm 2
17 78265-00 Fitting, 6mm AN 1
18 78269-00 Ferrule, Front, 6mm 1
19 78270-00 Ferrule, Back, 6mm 1
20 78273-00 Nut, 6mm OD 1
21 78949-00 Valve Assembly 2
22 77367-00 Valve Seat Assembly 2
Item #
A11699 TURBINE MANIFOLD ASSEMBLY - PARTS LIST
(Figure 64)
Part # Description Qty
Apply A11545 lubricant onto all o-rings before installation.
Torque to 15 lbs•in (1.7 Nm) after fitting is seated.
Torque to 15-20 lbs•in (1.7-2.3 Nm).
Torque to 15-20 lbs•in (1.7-2.3 Nm) after valve is down.
PARTS LIST BULLET DEFINITION TABLE (Figure 64)
4
4
4
4
3
4
3
1
2
4
3
2
1
RMA-303 Indirect Charge - Parts Identification
Ransburg
80 LN-9252-06.4