IAI America RCP2W-RA10C - Manual (Page 115)

109
14. Warranty
14. Warranty
14.1 Warranty Period
One of the following periods, whichever is shorter:
18 months after shipment from our factory
12 months after delivery to a specified location
2500 hours of operation time
14.2 Scope of Warranty
Our products are covered by warranty when all of the following conditions are met. Faulty products
covered by warranty will be replaced or repaired free of charge:
(1) The breakdown or problem in question pertains to our product as delivered by us or our authorized
dealer.
(2) The breakdown or problem in question occurred during the warranty period.
(3) The breakdown or problem in question occurred while the product was in use for an appropriate
purpose under the conditions and environment of use specified in the operation manual and catalog.
(4) The breakdown or problem in question was caused by a specification defect or problem, or by the
poor quality of our product.
Note that breakdowns due to any of the following reasons are excluded from the scope of warranty:
[1] Anything other than our product
[2] Modification or repair performed by a party other than us (unless we have approved such
modification or repair)
[4] A natural disaster, man-made disaster, incident or accident for which we are not liable
[3] Anything that could not be easily predicted with the level of science and technology available at
the time of shipment from our company
[5] Natural fading of paint or other symptoms of aging
[6] Wear, depletion or other expected result of use
[7] Operation noise, vibration or other subjective sensation not affecting function or maintenance
breakdown of our product is excluded from the scope of warranty.
Note that the warranty only covers our product as delivered and that any secondary loss arising from a
14.3 Honoring the Warranty
As a rule, the product must be brought to us for repair under warranty.
14.4 Limited Liability
(1) We shall assume no liability for any special damage, consequential loss or passive loss such as a
(2) We shall not be liable for any program or control method created by the customer to operate our
product or for the result of such program or control method.
loss of expected profit arising from or in connection with our product.