IAI America RCP2W-RA10C - Manual (Page 28)

22
2. Specifications
2. Specifications
(1) Maximum Speed
The maximum speed for the actuator is limited due to the resonance of the ball screw axis and the limitation
of the number of motor rotation.
Make sure that the maximum speed of your actuator does not exceed the applicable limit specified in the
table below.
[Standard]
Restriction in Stroke and Maximum Speed (unit: mm/s)
Type Motor Type
Lead
(mm)
Stroke (mm)
25 50 75 100
RCP-RA2C 20P 1 25
Restriction in Stroke and Maximum Speed (unit: mm/s)
Type Motor Type
Lead
(mm)
Stroke (mm)
50 100 150 200 250 300
RCP2-RA3C 28P
2.5 114 - -
5 187 - -
RCP2-RA4C 42P
2.5 125<114> 118<114> 87
5 250 237 175
10 458 350
RCP2-RA6C 56P
4 130
8 210
16 450<400>
RCP2-RA8C 60P
5 150
10 300
RCP2-RA10C 86P
2.5 63
5 125
10 250<167>
(Note) Values in brackets < > are the maximum speed when
vertically oriented.