IntelliTrack Package Track - Manual (Page 180)

I NTELLI T RACK DMS: P ACKAGE T RACK V 8.1
User Manual
166
5. When the data transfer finishes, the Successful Upload status screen on
the handheld closes. All of the changes from the handheld application
including any changes to recipients, packages, and delivery signatures
are sent to the Batch Synchronization Utility via the synchronization
process and immediately processed into the Package Track application.
Transferring Data from the Device via ActiveSync or
Windows Mobile Device Center Software
After you have established your sync routine in the Batch Synchronization
Utility, you are able to transfer data from the handheld device. When you
transfer data via the handheld device options, the application will use the
sync configuration settings that have been established in the Batch Syn-
chronization Utility. This means that if you have placed package and recip-
ient filters for sending data in the Batch Sync Utility, these filters will also
apply to the data synchronization that is done via the handheld. If you want
to change your sync configuration, you must reset it in the Batch Synchro-
nization Utility and then send the data from there before sending it again
from the handheld device.
To transfer data, connect the handheld device and the desktop computer
(by using a cradle or cable connection); data synchronization with Package
Track occurs via the Sync menu options in the batch portable application.
(Please refer to
“Sending Data to the Workstation Application” on page 169
and “Receiving Data from the Workstation Application” on page 169 for
more information.)