IntelliTrack Package Track - Manual (Page 22)

I NTELLI T RACK DMS: P ACKAGE T RACK V 8.1
User Manual
8
8. Determine the IntelliTrack Device Installation that you will use for
installing the IntelliTrack DMS application to your device. Please refer
to
“Determining your Device Installation” on page 32 .
Disabling
User Account
Control (UAC) You must disable User Account Control in Windows Vista and Windows 7
in order to run IntelliTrack software.
Disabling User Account Control in Windows 7
In Windows 7, User Account Control (UAC) is disabled at the User
Account Control Settings dialog. To reach this dialog, go to the Start menu
and enter UAC or go to the Control Panel’s Search box and enter UAC. At
the User Account Control Settings dialog, move the slider to the Never
Notify position.
Disabling User Account Control in Windows Vista/
Windows Server 2008
In Windows Vista, UAC is disabled from the Control Panel. Go to the Con-
trol Panel and enter “UAC” into the Search box; a link to turn off user
account control appears. Click the link, “Turn User Account (UAC) on or
off.” A screen appears that contains the UAC setting; at the Turn on User
Account Control (UAC) screen, unmark the Use User Account Control
(UAC) to help protect your computer check box. After you disable this
setting by making sure the check box is not marked, you must restart your
computer for the change to go into effect.
Required IIS
Settings for
Windows 7
and Windows
Vista Important:These requirements pertain to Windows Vista/Windows 7 oper-
ating systems. The required settings are listed in this section. If you are not
using Windows Vista/Windows 7 with IIS v7.0, this section does not apply
to you.
Internet Information Services (IIS) version 7 is included with Windows
Vista/Windows 7. However, you must turn Internet Information Services
(IIS) on before you can use it. Additionally, you must turn on specific web
management tools and world wide web services settings for Remote Data
Access (RDA), which DMS uses for workstation application and CE batch
portable application database communication. You must turn on IIS and
enable the required features BEFORE installing IntelliTrack DMS and the
CE Batch component. To turn IIS on and enable the required features for