IntelliTrack Package Track - Manual (Page 84)

I NTELLI T RACK DMS: P ACKAGE T RACK V 8.1
User Manual
70
5. When the data transfer finishes, the Successful Upload status screen on
the handheld closes.
Wireless
Batch Option Package Track contains a wireless batch option. Before using wireless
batch, you must register your application and send the sync config files to
the application via the Batch Sync Utility using an ActiveSync or Mobile
Device Center connection. This requires installing Package Track on the
handheld device, registering Package Track, sending the config files down
to the device after registering Package Track, and finally testing data
upload via the Batch Sync Utility to make sure that the batch registration
files have been sent to the handheld device. Once the system validates your
license and permits data upload to occur, you may implement wireless
batch for syncing.
To implement wireless batch for syncing, please follow these general
steps:
1. Register your Package Track application.
2. Using the DMS Batch Synchronization Utility, send data to the hand-
held application via the Microsoft ActiveSync or Windows Mobile
Device Center. To do this, open the DMS workstation application.
3. From the DMS workstation application, select Portable > Synchro-
nize CE Device; the DMS Batch Synchronization Utility appears.
4. In the DMS Batch Synchronization Utility, select the Send Data tab. In
the Send Data tab, click the Send button to download data to the hand-
held device through the ActiveSync or Mobile Device Center connec-
tion. This sends your sync configuration files to the handheld device.
5. Once you have downloaded data to the portable device, through the
ActiveSync or Windows Mobile Device Center connection, connect the
portable device to the wireless network.